Unit is located in the USA

Operating conditions 

15 psi suction 

1165 discharge 

900 RPM

Calc. Flow 6.3 MMSCF/d 

Engine and compressor comes with

Hot starts 

20" 150 Catalytic Converter DCL International Inc.

stainless exhaust 

Maxim muffler

Spec

Suction 1800

Discharge 3500

Flow 1000 e3m3

Built in 2009 by Propak, this unit has just under 65,000 total hours on it.  Designed for 1650psig MAWP full sour operation with excessive noise attenuation which is included in the price, but this feature doesn’t have to be taken if you don’t require it. Obviously, sour compressors of this size are rare on the surplus market and in this case, there is no possible way that anyone should buy new if this unit will fit the application – price and delivery can’t be beat. Call us for a custom performance sizing or to get pricing on moving, cylinder/vessel mods, overhaul comments etc. 

Drawings, detailed feature sheet and a 360 virtual tour are available.

Registration:
AB Only (some vessels have .123 and all are eligible for re-registration by us)

Status / Availability:
Connected; 2 weeks for Joint Venture partner approval.

Driver / Driven:
1450 hp @ 1200 rpm Waukesha 5794LT ESM; Ariel JGK/4-3

Control Panel:
Allen-Bradley Panel View 1000 HMI

Additional Notes:
10” 300# inlet/3” 900# outlet. purge packing & seal pot drain. Crankcase vented outside. Auto/Manual blowdown and recycle, Multiple diaphragm pumps for oil/glycol.  Sound attenuation on interior walls, cooler and all exhaust fans. 2 ton crane.  Fully Wired to JB’s c/w lights, exhaust fans, gas detection, ESD’s, 2 x fire-eyes, AC catadyne heat.

As Configured 3 Stage:

Suction Pressure: 60psi > Discharge Pressure:  1000psi > 7.95MMSCFD @ 1352 HP

Suction Pressure: 45psi > Discharge Pressure:  1500psi > 6.42MMSCFD @ 1347 HP

Suction Pressure: 65psi > Discharge Pressure:  1525psi > 6.73MMSCFD @ 1312 HP

=======================
ADDITIONAL INFORMATION
=======================

View full listing details and 360º virtual walkthrough of this equipment at https://www.crusaderjv.com/equipment/860hp-cat-3512-with-frick-tdsh355s-screw-compressor-cjv1894/

Two new surplus packages - Ariel JGD/4, 3-Stage, Cylinders: (2) 17-7/8D, (1) 12-1/2D, (1) 9-1/4D,
Caterpillar, G3606, 1875bhp, 1000rpm.

Each package is preserved and available to ship asap.

Full install, transport and commisioning activities available.

Additonal Photos and a complete data package is available.

(2) Identical, new surplus compressor unit offered as is or as "ready for service" with warranty. Transport and assembly options available.

A full sour Waukesha 7042GSI with 1 or 2 Stage reciprocating compressor and a generously oversized sour rated 48” x 14’ inlet separator and blowcase.  Currently setup for 2 stage service and is convertible to single stage. Further increasing its flexibility, by changing the 2nd stage pulsation bottle and replacing spools on discharge line, the MAWP of the unit can be increased to 900ANSI.  Located in southern Alberta with easy and economical access for loading and hauling. Disconnection from all foundational, piping, and electrical connections will be handled for you, so you can enjoy simple and straightforward logistics.  Call us for application specific performance and further information. 

Registration: AB
Status / Availability: Connected; 2 Weeks for Disconnection
Stages: Stage, Convertible to Single Stage
Cooler: Amercool – 1st Stage @ 1650psi M.A.P. ; 2nd Stage @ 1650psi M.A.P. ; AB/BC/SK Registered and PWHT

=======================
ADDITIONAL INFORMATION
=======================

View full listing details and 360º virtual walkthrough of this equipment at https://www.crusaderjv.com/equipment/1478-hp-sour-1-or-2-stage-reciprocating-compressor-package-cjv1892/

62046370 EQ - Job Book Compressor Package dociment (pdf, 210 Mb) is available.